Samson 3730 Series - Adjusting inductive limit switch

EB 8389-1S EN 113
Appendix
Parameters
Reset Code 36
Diag Std DS
Device settings > Process data > Min. operating point
Input pressure p1 NO NO YES
Flow rate NO NO YES
Output pressure p2 NO NO YES
Inlet temperature NO NO YES
Inlet density NO NO YES
Vapor pressure NO NO YES
Critical pressure NO NO YES
Isentropic exponent NO NO YES
Compressibility factor NO NO YES
Viscosity NO NO YES
Flow coefcient NO NO YES
Outlet velocity NO NO YES
Relative travel/angle NO NO YES
Differential pressure ratio NO NO YES
Sound pressure level NO NO YES
Device settings > Process data > Normal operating point
Input pressure p1 NO NO NO
Flow rate NO NO YES
Output pressure p2 NO NO NO
Inlet temperature NO NO NO
Inlet density NO NO NO
Vapor pressure NO NO YES
Critical pressure NO NO YES
Isentropic exponent NO NO YES
Compressibility factor NO NO YES
Viscosity NO NO YES
Flow coefcient NO NO YES