Samson 3730 Series Operating Instructions

40 EB 8389-1S EN
On/off valve
5.3 Resetting single status mes-
sages
The message and the limit values are reset
by selecting and executing "Reset measured
'On/off valve' values".
The positioner saves the reference analysis
and two further test analyses. The analysis of
the oldest test is deleted when another test is
performed.
Diagnostics > Service/maintenance > Reset
− Reset measured 'On/off valve' values

Samson 3730 Series Specifications

General

Brand	Samson
Model	3730 Series
Category	Valve Positioners
Language	English