Samson 3730 Series - Page 110

7-14 EB 8384-3 EN
Start-up and conguration
Deactivate travel limit:
1. Turn untilCode11appears.
2. Press , the code number 11 blinks.
3. Turn until No appears.
4. Press to deactivate the travel limit func-
tion.
Travel limitation
Default: No
Change pressure limit and control parameters:
Do not change the pressure limit (Code16). Only change the control parameters K
P
(Code
17) and T
V
(Code 18) if the settings of the replaced positioner are known.
1. Turn untiltherequiredCode16/17/18
appears.
2. Press ,thecodenumber16/17/18
blinks.
3. Turn to set the control parameter select-
ed.
4. Press toconrm.
Pressure limit
Default: No
K
P
level
Default: 7
T
V
level
Default: 2
Note