Samsung AC Series - Screen Settings for Side by Side Installation

LED R&D Lab(VD)
117
Screen Settings for Side by Side Installation
□ Side by Side Installation Method
Install four IAB/IAC sets side by side from side and connect the video source (HDMI)
When activating the LED HDR function, 3.5pi stereo cable connection is required to match the brightness
between the two sets as shown in the figure below
Back side external input port
Connect 3.5pi stereo cable
to HDR DATA IN port
source
IAB/IAC set 1 IAB/IAC set 2
Connect 3.5pi stereo cable
to HDR DATA IN port
Connect 3.5pi stereo cable
to HDR DATA OUT port
IAB/IAC set 3 IAB/IAC set 4
Connect 3.5pi stereo cable
to HDR DATA OUT port
Connect 3.5pi stereo cable
to HDR DATA OUT port
Connect 3.5pi stereo cable
to HDR DATA IN port
Back side external input port Back side external input port
Back side external input port