Samsung AC Series - Set up screen when installing Side by Side, Method 2 - LSM

LED R&D Lab(VD)
125
② IP connection in LSM
Case 2) Write SLED IP Success, Write Cabinet IP Ready
1) Write the IP of the SET >
‘Add’ Click
2) Model type ‘All In One’ Click
Release a connect with existing settings
1st Octet 192
2nd Octet 168
3rd Octet 176
SLED 4th Octet 51
Cabinet Start 4th Octet 111
Write SLED IP Success
Write Cabinet IP Ready
IAB/IAC
Factory – Control – TheWall Option –
Manager/Network – SLED IP setting
3) Release a connect with existing settings
4) Repeat 1 to 3 times to connect all SETs
of Ips to the LSM
Case 2
Write SLED IP – Success
Write Cabinet IP – Ready
Set up screen when installing Side by Side, Method 2 – LSM
□ Settings for each SET
If there is a SET setting with the same IP
in the network, IP conflict may occur