LED R&D Lab(VD)
31
⑥-2 Close the bottom of ASSY BRACKET P-FRAME to the wall
- ** This course is not an essential course that must be done (Use only when you need to fix the bottom part completely)
- Fix the bottom part using the bolt and ring enclosed in the Accessory kit
Holder bolt
Holder ring
Anchor bolt
D
E
F
4. FRAME installation and cable connection
Fig.1 Wall hole opening
Fig.2 Bolt coupling
After removing PC SHEET, pierce
the wall based on the hole
WALL direction
SCREEN direction
To Next Page
Loading...
