LED R&D Lab(VD)
47
⑬ Check if the screen position is correct based on the DECO GAP PAD, and then adjust the screen position.
- Adjust the X-axis position based on the DECO position and then adjust the Y-axis position.
SCREEN
GAP PAD
DECO SIDE
Fig.1 Confirmation position
Fig.2 Screen positioning
Cabinet X positioning
1. Adjust using the driver
(mentioned earlier)
2. Move after deco removal
if necessary
0.5mm
0.1mm
4. FRAME installation and cable connection
To Next Page
Loading...
