LED R&D Lab(VD)
48
COVER-DECO TOP
LED MODULE
A
A
section A-A
SCREEN Y Moving
⑭ Move the headless bolt through the hole of the DECO TOP
- The SET tilt can be removed using a headless bolt and the Y-axis can be adjusted to remain horizontal.
- After adjustment, separate the LEFT and TOP DECO from the SET.
4. FRAME installation and cable connection
Insert Wrench
BOLT-ETC
(TILT remove)
Fig.1 Y controll point
Remove DECO after checking
horizontal and vertical
Fig.2 Deco removal after tilt check
To Next Page
Loading...
