LED R&D Lab(VD)
27
③ Before installing FRAME on Wall Mount, the following connection is required
- Connect the power cable to the left frame and right frame, respectively
- Power Cable – Connects 2Power Cord
- Since it is difficult to access after installation depending on the environment,
connect the external terminal(HDMI, LAN, DP, etc.) cable to be used
※ Power cord – Connect the outlet power when set operation is required, do not connect in advance
Power Cord Power Cable
4. FRAME installation and cable connection
Connect the
outlet when set
operation is
required after
P-FRONT is
completed
To Next Page
Loading...
