Samsung AC Series - Product disassembly method - 1) Screen Desorption 130”

LED R&D Lab(VD)
70
3
SCREW
1
1
2
2
MAGNET
⑤ assemble the cover-corner into a disassembled screen
and store it in a packaged state..
1
2
Place the EPE PAD on the floor, place the module facing
the floor, and assemble the COVER CORNER to prevent
damage.
① BEZEL TOP/BOTTOM disassemble :
screw disassemble
③ BRACKET-SUPPORT disassemble
② BEZEL SIDE disassemble : Magnet desorption
Product disassembly method – 1) Screen Desorption 130”
④ Separated in order of outside → inside (1 → 2)
* Before separation, pull the bottom to create a space and
remove the CABLE first
ⓐ Securing space at the
bottom of FRONT
ⓑ Remove CABLE
* Decomposition screen storage method