A. Definition
The function that allows the product to enter dehumidification mode by turning on the remote control power to the key by
grasping the conditions requiring dehumidification
B. Detailed Description
1. Factory Option (Control – TheWall Option – Sensor Option – Dehumid Function) 'PWR ON' setting
2. Check humidity and screen off time every 1 hour in standby state
3. If the humidity is more than 80% or the screen is turned off for more than 10 days, automatically proceeds with
dehumidification mode when the remote control is power on by user.
4. When the dehumidification mode is turned on, the dehumidification mode pattern play(24 hours, changing the pattern that
darkens every 2 hours, playing Full White in the section from 22 to 24 hours)
5. To exit dehumidification mode while in progress, press the remote control RETURN KEY to reboot
※ Manual dehumidification is required because Semi Auto dehumidification mode does not work when Remote Configuration
'ON' state or DPMS state
Dehumidification guide – Semi Auto
< Factory Option > < Humidity sensor position >
To Next Page
Loading...
