LED R&D Lab(VD)
52
② Install the FRAME BEZEL TOP at the top and screw.
- Place the FRAME BEZEL SIDE and FRAME BEZEL TOP/BOTTOM together so that there is no GAP.
- The M3 screw enters into TOP/BOTTOM with FRAME BEZEL SIDE, and the M4 screw enters into CABINET.
GAP : 0~0.1mm
M3
M4
①. Assemble the BRACKET LINK and DECO TOP LEFT first.
②.assemble the DECO TOP RIGHT after ① operation.
N
O
Q
M4,L12
M6,L10
M3,L5
5. Frame Bezel Installation
To Next Page
Loading...
