Samsung BD-D5500 - Connections; Connecting to a TV

Connections
Connecting to a TV
Case 1 : Connecting to a TV with an HOMI Cable - Best Quality
(Recommended)
1. Using an HDMI cable, connect the HOMI OUT terminal on the rear of the player to the HOMI IN
terminal of your 1V.
2. Turn on the player and 1V.
3. Press the input selector on your 1V remote control until the HDMI signal from the player appears on
your 1V screen.
• If you have set the remote control to operate your 1V (See page 19), press the TV SOURCE
button on the remote control and select HDMI as the external source of the 1V.
-
HDMIIN
~ NOTE
• An HOMI cable outputs digital video/audio, so you don't need to connect an audio cable.
• If the player is connected to your TV in the HOM Inop, 1 080i, or 1 080p output mode, you must use a High speed
(category 2) HOMI cable.
• HOM I outputs only a pure digital signal to the TV.
If your TV does not support HOCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
• Depending on your TV, certain HOMI output resolutions may not work. Please refer to the user manual of your TV.
• When you connect tQe player to the TV using the HOM I cable for the first time or to a new TV, the HOMI output
resolution will be automatically set to the highest supported by the TV.
• You must have an HOMI connection to enjoy videos with 3D technology.
• A long HOM I cable may cause a screen noise. If this occurs, set Deep Color to Off in the menu.
20 English