Samsung BD-D5500 - Contact Samsung

Setup
By Disc
To upgrade by Disc, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest disc software upgrade
zip archive to your computer.
3. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
4. Write the folder onto a disc. We recommend
a CD-R or DVD-R.
5. Finalize the disc before you remove it from
your computer.
6. Insert the disc into player.
7. In the player's menu, go to Settings> Support
> Software
upgrade.
8. Select By Disc.
~ NOTE
• When the system upgrade is done, check the
software details in the software Upgrade menu.
• Do not turn off the player during the Software
Upgrade. It may cause the player malfunction.
By Downloaded
The By Downloaded option lets you upgrade
using a file the player downloaded earlier but
you decided not to install immediately or a file
downloaded by the player in Standby Mode (See
Download in Standby Mode below).
To upgrade By Downloaded, follow these steps:
1. If upgrade software has been downloaded
you will see the software version number t~
the right of By Downloaded.
2. Select By Downloaded, and then press the
ENTER button.
3. The player displays a message asking if you
want to upgrade. Select Yes. The player
begins the upgrade.
4. When the update is complete, the player turns
off automatically, and then turns on.
44 English
~ NOTE
• When the system upgrade is done, check the
software details in the software Upgrade menu.
• Do not turn off the player during the software
Upgrade. It may cause the player to malfunction.
• To use the By Downloaded function, your player
must be connected to the Internet.
Download in Standby Mode
You can set the Download in Standby Mode
function so that the player downloads new
upgrade software when it is in Standby mode. In
Standby mode, the player is off, but its Internet
connection is active. This allows the player to
download upgrade software automatically, when
you are not using it.
To set Download in Standby Mode, follow these
steps:
1. Press the & T buttons to select Download in
Standby Mode, and then press the ENTER
button.
2. Select On or Off.
• Off: If you select Off, the player will notify
you with a pop up message when new
upgrade software is available.
• On : If you select On, the player will
automatically download new upgrade
software when it is in Standby mode with
the power off. If it downloads new upgrade
software, the player will ask you if you want
to install it when you turn the player on.
~ NOTE
• To use the Download in Standby Mode function, your
player must be connected to the Internet.
Contact Samsung
Provides contact information for assistance with
your player.