Samsung BD-D5500 - Playback Adjustments

Basic Functions
Repeating a Section
1. During playback, press the TOOLS
button.
2. Press the ~ T buttons to select Repeat Mode.
3. Press the ... ~ buttons to select Repeat A-B,
then press the ENTER button.
4. Press the ENTER button at the point where
you want repeat play to start (A).
5. Press the ENTER button at the point where
you want repeat play to stop (B).
6. To return to normal play, press the TOOLS
button again.
7. Press the ~ T buttons to select Repeat Mode.
8. Press the ... ~ buttons to select Off, and then
press the ENTER button.
~ NOTE
• If you set point (B) before 5 seconds has lapsed, a
prohibition message appears.
Changing to Full Screen
1. During playback, press the TOOLS button.
2. Press the ~ T buttons to select Full Screen.
3. Press the ... ~ buttons to select the desired
mode.
~ NOTE
• This function is available when the TV aspect ratio is
16:9 full. (See page 31)
48 English
Selecting the Picture Settings
This function enables you to adjust video quality
when the player is connected to a lV.
1. During playback, press the TOOLS button.
2. Press the ~ T buttons to select Picture
Settings, and then press the ENTER button.
3. Press the ... ~ buttons to select the desired
Picture Settings, and then press the ENTER
button.
• Dynamic: Choose this setting to increase
Sharpness.
• Normal : Choose this setting for most
viewing applications.
• Movie: This is the best setting for watching
movies.
• User: Lets you adjust the sharpness and
noise reduction function respectively.
~ NOTE
• When you use BO wise function, this menu will not
appear.
Selecting the Audio Language
1. During playback, press the TOOLS button.
2. Press the ~ T buttons to select Audio.
3. Press the ... ~ buttons to select the desired
audio language.
~ NOTE
• The ... ~ indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• Information about the main feature/BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
Press the ... ~ button to switch between main
feature and BONUSVIEW audio modes.