Samsung BD-D5500 - Support and Software Upgrade

6. If this is the first time you are using the
function, it will ask you to allow or deny
remote control of the player. Select Allow.
7. Follow the instructions that came with the
application to control the player.
Support
Software Upgrade
The Software Upgrade menu allows you to
upgrade
the player's software for performance
improvements
or additional services. You can
upgrade in four ways:
• By Internet
• By USB
• By Disc
• By Downloaded (File)
The four methods are explained below.
By Internet
To upgrade by Internet, follow these steps:
1. Select By Internet, and then press the
ENTER button. The Connecting to Server
message appears.
2. If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3. When the download is complete, the Upgrade
Query window appears with three choices:
Upgrade Now, Upgrade Later, or Don't
Upgrade.
4. If you select Upgrade Now, the player
upgrades the software, turns off, and then
turns on automatically.
5. If you do not make a selection in one minute
or select Upgrade Later, the player stores
the new upgrade software. You can upgrade
the software later using the By Downloaded
function.
6. If you select Don't Upgrade, the player
cancels the upgrade.
~ NOTE
• Your player must be connected to the Internet to use
the By Internet function.
• The upgrade is complete when the player turns off,
and then turns on again by itself.
• Never turn the player off or back on manually during
the update process.
• Sam sung Electronics shall take no legal responsibility
for player malfunction caused by an unstable
Internet connection or consumer negligence during a
software upgrade.
• If you want to cancel the upgrade while the upgrade
software is downloading, press the ENTER button.
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport
2. Download the latest USB software upgrade
zip archive to your computer.
3. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
4. Copy the folder to a USB flash drive.
5. Make sure the disc tray is empty, and then
insert the USB flash drive into the USB port of
the player.
6. In the player's menu, go to Settings> Support
> Software
Upgrade.
7. Select By USB.
~ NOTE
• The disc tray must be empty when you upgrade the
software using the USB Host jack.
• When the software upgrade is done, check the
software details in the software Upgrade menu.
• Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
• Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.
English 43