Caller ID
Caller ID identifies a caller while the phone is ringing, by displaying the number of the incoming call.
Block Caller ID
You can block your Caller ID (visible to other when you make a call), before making a call. The blocking
only lasts for that call, and then returns to regular Caller ID.
Note: To permanently block your number, you must call Sprint Customer Service.
1. On t
he Edge screen, tap
Phone. If t
he keypad is not shown, tap the Keypad
tab at the top of
the screen.
–
or
–
From
home, tap
Phone. If the keypad is not shown, tap the Keypad
tab at the top of the
screen.
3. Enter a phone number, and then tap
Call Waiting
When you are on a call, your phone notifies you by displaying the call information on the screen, and
vibrating, if you’ve set up vibration for incoming calls.
Respond to an Incoming Call While You Are On a Call
From the Edge screen:
■ Drag
down. This puts the first caller on hold and answers the incoming call.
To switch
between calls, tap Swap.
From the call screen:
■ Dra
g
to the right. This puts the first caller on hold and answers the incoming call.
To switch
between calls, tap
Swap.
2. Tap .
.
Phone Calls 44