Replacing a Cylinder
When the taste of sparkling water is weak or non-existent, replace the current cylinder
with a new cylinder. To replace a cylinder, follow these steps:
To do list
4. Disassembly and Assembly
119
4-35. Assembling Procedures of the CO2 Cylinder and Precautions
1. Lift up the Lever holding the cylinder in place.
2. Pull the Cylinder out of the Support.
3. Rotate the Cylinder counterclockwise to remove it from the Regulator.
4. To install a new cylinder, follow the directions for installing a cylinder starting at Step 2 in Installing a
Cylinder into the Refrigerator.
To Next Page
Loading...
