To do list
4. Disassembly and Assembly
122
4-35. Assembling Procedures of the CO2 Cylinder and Precautions
2. Attach the Cylinder to the Regulator, and then rotate it clockwise.
3. Push the Cylinder into the Support.
4. Lock the Cylinder into place by pressing the Lever.
• If you don’t lock the cylinder into place, the refrigerator won’t produce
sparkling water.
5. Press the Sparkling Water button for 3 seconds to turn the Cylinder reset function on.
• If you replace the CO2 Cylinder during Sparkling Water Production (The Carbonation Level Icon
turns on in the order of 1 → 2 → 3 → 1.), wait until the refrigerator completes production before
turning the Sparkling Water Production function back on. Because you interrupted production, the
sparkling water may be over carbonated. If you want accurate carbonation level in the next
production, you need to empty the tank before you start production.
To Next Page
Loading...
