60
Chapter 5. Menu
Sound adjustment
Sound ▼
2nd 3rd Description
Sound Mode You can select a sound mode to suit your personal preferences.
• If Sound Output is set to External, Sound Mode is disabled.
Balance Adjust speaker volume levels for sound balance optimization.
• If Sound Output is set to External, Balance is disabled.
Equaliser Adjust the equaliser to customise the volume and pitch, and enhance the richness of the sound output.
• If Sound Output is set to External, Equaliser is disabled.
HDMI Sound Select the sound source whether to hear from AV(HDMI) or PC(DVI).
Sound on Video Call Select sound output to listen to during a video call.
Sound Output If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound
echo caused by the difference in decoding speed between the products speakers and the speakers attached to your
audio receiver. If this occurs, set the product to External.
• When you set Sound Output to External, the products speakers are turned off.
You will hear sound through the external speakers only. When the Sound Output is set to Internal, both the
product speakers and the external speakers are on. You will hear sound through both.
• If there is no video signal, both the products speakers and the external speakers will be mute.
Auto Volume The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
• To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of
the connected source device may not be applied if Auto Volume is set to Normal or Night.
• If Sound Output is set to External, Auto Volume is disabled.
Reset Sound Reset all sound settings to the factory defaults.
To Next Page
Loading...
Need help?
General
