62
Chapter 5. Menu
Network
Network ▼
2nd 3rd Description
Network Status You can check the current network and Internet status.
Open Network
Settings
Congure network settings to use various smart hub features such as Internet search, content sharing through a
home network and feature updates.
Server Network
Settings
Connect to Server To run Player connect to a network.
• If the SSL option is enabled, the server is congured to use https and data transfer is encrypted.
• Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using
port number 7001, check with your server administrator to nd the correct port number and then change the port
number.)
MagicInfo Mode Select the appropriate MagicInfo Mode depending on the environment where you are using the product.
Server Access Allow or deny access from MagicInfo server.
FTP Mode Specify the FTP operating mode.
Proxy server Turn on or off and congure proxy server settings.
Wi-Fi Direct Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices
with your product directly without a router.
• To use this function, your mobile device should be supported by the Wi-Fi Direct.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1 Go to Wi-Fi Direct screen. The product starts to search devices.
2 Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
‒ PBC (Push Button Conguration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your
product automatically acquires all the network setting values it needs and connects to your network.
‒ PIN: Input the displayed PIN on your device.
• If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
To Next Page
Loading...
Need help?
General
