IENGLISHI
Preparing
Battery level display
• Thebatteryleveldisplayindicatestheamountofpowerremaininginthe batterypack.
a. Fully charged
b. 10% used
c. Half used
d. Mostly used
e. Completely used (flickers)
(camcorder will turn offsoon, change the battery as soon as possible)
Please refer to the table on page 23 for approximate continuousrecording times.
The recording time is affected by environmentaltemperature and conditions.
The recording time becomes very short in a coIdenvironment. The continuous recording time in the operating
instructions is measured using a fully charged battery pack at 77°F(25°C).As the environmental temperature and
conditions may be different when you actually usethe camcorder,the remaining battery time may not be the same
as the approximate continuous recording times given in these instructions.
4_
[i e
Tips for Battery Identification
A charge mai_ is provided onthe battery pack to help you remember whether it has been charged or not.
Two colors are provided (red and black)-you may choose which one indicatescharged and which indicates
discharged.
+ The Charge markdoes not affect the battery's charge status.
,,&
To Next Page
Loading...
