IENGLISHI
Basic Recording
1. Connect a Powersource. (see page 21)
(Battery pack orAC power adapter)
• Insert a cassette. (see page 25)
2. Remove the LENS CAP and hook it onto the hand strap.
3. Set the powerswitch to the CAMERA position.
• Open the LCD monitor and make sure that STBY is displayed.
• If the protection tab of the cassette isopen, STOP will be displayed.
• Make sure the image you want to record appears in the LCD monitor or
viewfinder.
• Make sure the battery level indicates that there is enough remaining power
for your expected recording time.
4. To start recording, press the START/STOPbutton.
• REC is displayed in the LCD.
To stop recording, press the START/STOP button again.
• STBY is displayed in the LCD.
To Next Page
Loading...
