Advanced Recording
[ENGLISH
The AUDIO DUBBING function only works in PLAYER Mode.
You can add sound to the original sound on a pre-recorded tape, recorded in the SP mode with 12bit sound.
Use the internal, or an external microphone.
+ The original sound will not be erased.
Dubbing sound with a microphone
1. Set the camcorder to PLAYER mode.
• if you want to use the external microphone, connect the microphone
to the externaI MIC input on the camcorder.
2. Press I_/11(PLAY/STILL) button and find the start position of the scene to be dubbed.
3. Press )/11 (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
• A.DUB will be displayed in the LCD.
• The camcorder is in a ready-to-dub state.
5. Press the )/11 (PLAY/STILL) button to start dubbing.
• Press the re(STOP) buttonto stop the dubbing.
• You can not dub sound on a pre-recordedtape recorded
in LP mode or 16 bit mode.
To Next Page
Loading...
