Advanced Recording
[ENGLISH_
+ You can customize settings and save them for future use.
• The CUSTOM SET function operates in CAMERA mode only.
+ Please set custom settings before using this function. (see page 34)
1. Set the power switch to CAMERA mode.
2. To activate the CUSTOM function, press the CUSTOM button.
• "CUSTOM" will be displayed on the screen.
3. Press START/STOP to start recording.
• Recording will begin using the CUSTOM settings.
4. To switch the CUSTOM mode off, press the CUSTOM button again.
• The camcorder will revert to the settings that were set prior to the custom mode being selected.
CUSTOM
• Once settings have been made in the Custom mode, you turn the Custom mode off to make changes to
these settings.
• The CUSTOM settings will be stored in the camera (providing a good lithium battery has been installed).
To Next Page
Loading...
