[ENGLISH]
Advanced Recording
• IRIS
+ The IRISfunction works in CAMERA mode only.
+ The IRIS controls the quantity of light entering through the lens.
+ If you select a higher value, the iris opens, and the imagewill be brighter.
If you select a lower value, the iris closes, and the image will bedarker.
• You can select one of the following,
AUTO : It selectsthe iris value for the proper exposure.
MANUAL: 0 ~ 29
1. Set the camcorder to CAMERA mode.
2. Press the MENU ON/OFF button.
• The menu list will appear.
3. Turn the MENU DIALto highlight IRIS.
4. Press ENTER to enter the sub-menu,
• If you want to use manual mode, select MANUAL and press ENTER.
• Using the MENU DIAL, select the IRIS value.
5. To exit, press the MENU ON/OFF button.
• IAIS •
To Next Page
Loading...
