Basic Recording
Adjusting the LCD during PLAY
•X, You can adjust the LCD during playback.
_, The adjustment method is the same procedure as used in CAMERA mode. (see page 29)
IENGLISH
The Speakerworks in PLAYER mode only.
• When you use the LCD monitor for playback,you can hear the recorded sound from the built-in Speaker.
If you do not want to hear the sound set SPEAKERto OFF in the menu.
1. Set the power switch to PLAYER mode.
2. Press the MENU ON/OFF button.
3. Turn the MENU DIAL to highlight SPEAKER.
4. Press the ENTER button to change the setting.
5. Press the MENU ON/OFF button tofinish the SPEAKER setting.
• If you dose the LCD monitor,both the LCD and speaker are switched off.
• If the speaker does not work properly,check these points;
- Is the LCD monitor closed?
Is the volume adjusted to a low?
Is the SPEAKER set to OFF in the menu?
Volume Control
•X,Thevolumeof theSpeakeriscontrolledbymovingtheZOOMlever(VolumeControl)duringplayback.
/MENU) SP STOP
LCD ADJUST
PHOTO SEARCH
AUDIO $EL ....... SOUND1
REC MODE ........ SP
DISPLAY ...... LCD
MENU
&
To Next Page
Loading...
