Samsung SCD67 - Recording with DV Connecting Cable

IENGLISHI
IEEE 1394 Data Transfer
• System requirements
• CPU : faster Intel'_Pentium IllTM 450Mhz compatible
• Operating system: Windowd_98SE, ME, XP, Mac OS
• Main memory: more than 64 MB RAM
• IEEE1394 add-on card or built in IEEE1394card
Recordingwith DV connecting cable
1. Setthepowerswitchto PLAYERmode.
2. Connect the DV cable (not supplied) to the DV IN/OUTport of camcorder and
to the DV IN/OUT portof the other DV device.
• Make sure DV INappears on the monitor.
3. Press the START/STOP button to enter the REC PAUSE mode.
• PAUSE is displayed in the OSD.
4. Start playback on the other DV device while you monitorthe picture.
5. Press the START/STOPbutton to start recording.
• If you want to pause recording for a while, press the START/STOP button again.
6. To stop recording, press the ==(STOP)button.
IN/OUT
(Not Supplied)
DV port linking diagram
• When making recordings onthe camcerder,the pictures onthe LCD or a TV monitormay occasionally be uneven,
however recorded pictures are not affected.