Samsung SVR-1630 - Monitoring Features; Channel Switching; Automatic Switching Screen; Basic System Mode Switching

SVR-1630 Installation and Connection
14
2004. 07. 2004 (v 1.0)
Samsung Techwin
4.3 Connecting a Monitor
4.3.1 Connecting a CCTV Monitor
(1) Connect a monitor to the SVR-1630 using the coaxial cable as shown in the figure below.
4.3.2 Connecting a VGA Monitor
(1) Monitor Outuput A can output to VGA. For better definition quality, connect Monitor A to the VGA
Monitor as shown in the figure below.
<Note>
1. The SVR-1630 monitor outputs are divided into A (Normal) and B (Spot). If only one monitor is
connected, connect Monitor A.
2. For Monitor Output A, the same video output is transferred to two BNC connectors and an S-VHS
connector.