SVR-1630 Installation and Connection
28
2004. 07. 2004 (v 1.0)
Samsung Techwin
8.3.3 Record Rate/Quality
(1) Select “Recording Speed/Quality” using the [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [
◀/▶
] buttons. Press the [ESC] button when finished.
<Note> Record Rate/Quality means
Low : Rate=1fps and Quality=Q5
Std. : Rate=5fps and Quality=Q5
High : Rate=15fps and Quality=Q5
Customer : Rate and Quality =
Manually defined by User.
8.3.4 Rate (fps)
When “Recording Speed/Quality” is set as “Customer,” values can be set manually.
(1) Select “Speed” using the [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [
◀/▶
] buttons. Press the [ESC] button when finished.
8.3.5 Quality
When “Recording Speed/Quality” is set as “Customer,” values can be set manually.
(1) Select “Quality” using the [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [
◀/▶
] buttons. Press the [ESC] button when finished.
8.3.6 Audio Record
(1) Select “Audio Record” using the [▲/▼] buttons and press the [ENTER] button.
(2) Select a value using the [
◀/▶
] buttons. Press the [ESC] button when finished.
8.3.7 Apply
(1)
Select “Apply” using the [▲/▼] buttons and press the [ENTER] button.
(2)
Setting values are applied and the previous menu will be displayed.
To Next Page
Loading...
