Samsung SVR-1630 - Data Backup Procedures; Backup Data to External Disk

SVR-1630 Installation and Connection
26
2004. 07. 2004 (v 1.0)
Samsung Techwin
8.2.4 Time Format
(1) Select “Time Format” using the [ ◀/▶ ] or [▲/▼] buttons and press [ENTER].
(2) Two Time Formats are available; ‘MM/DD/YYYY’ ,‘YYYY/MM/DD’ ‘DD/MM/YYYY’. Select a value
using the [▲/▼] buttons, and press the [ESC] button when finished. (Default value is ‘MM/DD/YYYY’.)
8.2.5 Date Mode
(1) Select “Date Mode” using the [ ◀/▶ ] or [▲/▼] buttons and press [ENTER].
(2) Select ‘MM’/‘DD’/‘YYYY’ using the [
◀/▶] buttons, and select the value using the [▲/▼] buttons.
(3) Press the [ESC] button when finished.
8.2.6 Time
(1) Select “Time” using the [ ◀/▶ ] or [▲/▼] buttons and press [ENTER].
(2) Select ‘HH’/‘MM’ using the [
◀/▶ ] buttons, and select the value using the [▲/▼] buttons.
(3) Press the [ESC] button when finished.
8.2.7 Apply Date/Time
Most setting values are applied automatically when exiting from the related menu page. But “Date”&
“Time” settings are not applied automatically because they may critically affect the file system of the
recorded HDD. To apply Date/Time settings, confirm the settings with the [Apply Date/Time] button.
(1) Select “Apply Date/time” using the [ ◀/▶ ] or [▲/▼] buttons and press [ENTER]. A warning message will
appear.
Select “Yes” using the [ ◀/▶ ] or [▲/▼] buttons and press [ENTER]. To cancel, press the [ESC] button.
8.3 Setting Recording Conditions
Recording conditions under the “Quick Setup” menu tab apply the same values to all 1~16analog channels. All
settings are applied for 24 hours/day regardless of the values set for “Time Schedule” or “Alarm Rec.”
메모 [E1]: 추가