Installation and Connection SVR-1630
Samsung Techwin
2004. 07. 2001 (v 1.0)
19
6. Remote Controller Setup and Basic Control
6.1 Setting ID of SVR-1630
When controlling several
SVR-1630s
with one remote controller, multiple DVRs can be set by one remote
controller. Set the remote controller ID as described below.
(1) Press the [MENU] button.
(2)
Select “System” by using the [
▶
] button and press the [ENTER] or [▼] button.
(3) Select “Etc.” using the [▼] button and press the [ENTER] button.
(4) Select “Remote Control ID,” and press the [ENTER] button.
(5) Select a value using the [
◀/▶
] buttons and press the [ESC] button.
(6) Press the [ESC] button to return to Monitor mode.
To Next Page
Loading...
