Installation and Connection SVR-1630
Samsung Techwin
2004. 07. 2001 (v 1.0)
49
11.2 Configuring an SVR-1630 Network
The following description is on based on Ethernet connection. For more detailed information on the Network
Settings Page and when xDSL is used, please refer to the “
SVR-1630 User Manual”
(1) Press the [MENU] button.
(2) Select “System” using the [
◀/▶
] buttons and press [ENTER].
(3) Select “Network” using the [▲/▼] buttons and press [ENTER].
(4) Select “IP Addr” using the [▲/▼] buttons and press [ENTER].
(5) Press the [ESC] button after entering the IP address in the dialogue box.
(6) Select “Net Mask” using the [▲/▼] buttons and press [ENTER].
(7) Press the [ESC] button after entering the Net Mask in the dialogue box.
(8) Select “Gateway” using the [▲/▼] buttons and press [ENTER].
(9) Press the [ESC] button after entering the Gateway in the dialogue box.
(10) Select “DNS” using the [▲/▼] buttons and press [ENTER].
(11) Press the [ESC] button after entering the DNS in the dialogue box.
(12) Press the [ESC] button until the Monitor Mode appears.
To Next Page
Loading...
