Samsung SVR-1630 - System Setup: NTP; NTP Settings Configuration

Appendix SVR-1630
Samsung Techwin
2004. 07. 2001 (v 1.0)
59
1.3 Keeping Data
To keep stored data for certain periods or semi-permanently, you should separate and keep HDDs with data on
them.
1.3.1 Backup
(1) Connect a backup HDD to an IEEE1394 port.
(2) Go to playback mode by pressing the [Playback] button.
(3) Press the [COPY] button.
(4)
Run the “Backup Manager” by selecting the “Backup Data” menu.
(5)
Set the backup range and press the “Start” button after selecting the backup HDD.
<Note>
1. Backup HDDs should be formatted to the FAT32 type.
2. Backup data can be played on a PC with dedicated players such as SVR Manager or MiniPlayer.
3. Backup data is made as one “*.re3” file. If the file size is over 2GB, it may not be recognized normally
because of the PC file system structure.
4. In the course of backup, the “Auto Delete” function doesn’t work. If the HDD is full, recording may be
stopped instantly.
5. For more detailed information on the SVR Manager’s backup, please refer to the “SVR Manager User
Guide”.