SVR-1630 Installation and Connection
34
2004. 07. 2004 (v 1.0)
Samsung Techwin
9.3 Connecting and Configuring Serial Communication Ports
9.3.1 Connecting Serial Communication Ports for Pan/Tilt/Zoom
PTZ devices can only be connected and controlled provided that the SVR-1630 supports a through COM port.
Check the models available in the SVR-1630OSD Menu. The figure below is an example for connecting an
RS485 (COM2) communication terminal to a PTZ camera. Connect other serial communication ports to other
devices by referring to the connection layout in the figure below.
For connecting or removing wires, see
“Preparing and Connecting Wires” on page 29.
To Next Page
Loading...
