SVR-1630 Installation and Connection
20
2004. 07. 2004 (v 1.0)
Samsung Techwin
6.2 Selecting SVR-1630
Multiple DVRs with different IDs can be controlled by one remote controller. To select a specific
SVR-1630
,
press the ID button of the remote controller. When the DVR ID matches the remote controller ID, the LED on
the front of the
SVR-1630
lights up and a buzzer sounds for two seconds.
<Note>
Up to 16 Remote Controller IDs are supported, which consist of two digits from 1 to 4.
ID Key Sets ID Key Sets ID Key Sets ID Key Sets
ID1-1 1 , 1 ID2-1 2 , 1 ID3-1 3 , 1 ID4-1 4 , 1
ID1-2 1 , 2 ID2-2 2 , 2 ID3-2 3 , 2 ID4-2 4 , 2
ID1-3 1 , 3 ID2-3 2 , 3 ID3-3 3 , 3 ID4-3 4 , 3
ID1-4 1 , 4 ID2-4 2 , 4 ID3-4 3 , 4 ID4-4 4 , 4
6.3 Operable Range of the Remote Controller
6.4
Loading batteries into the remote controller
The remote controller uses only AAA-type batteries.
The batteries are loaded into the remote controller as
described below.
1.
Remove the battery cover.
2. Check battery polarity and insert batteries.
To Next Page
Loading...
