Installation and Connection SVR-1630
Samsung Techwin
2004. 07. 2001 (v 1.0)
41
9.5 Connecting a USB Device
A USB port generally uses a USB memtory for a simple video copy. For connecting a USB device, its rated
values shall not exceed the specification defined below.
USB Spec. Ver 1.1 (Max 12M bps)
Available Devices USB Memory
Output
Voltage/Current
DC 5V / Max. 200mA
<Note>
The disk should be formatted to the FAT32 type.
If properly connected, the disk is recognized automatically as in the following picture. To copy images,
the process is as follows: Set copy range (up to 1 minute)
Æ
Select Disk
Æ
Copy (press “Start”).
Copy Images
Type
Start
Model Size (KB)
[F] Ext Sony Flash Memory 6640
1 Disk(s)
Select
Disk
Time 5 sec
To Next Page
Loading...
