Samsung SVR-1630 - Data Management: Copy and Backup; Copy Image to USB

Installation and Connection SVR-1630
Samsung Techwin
2004. 07. 2001 (v 1.0)
25
8.2 Setting Date and Time
(1) Press the [MENU] button, and select the “Quick Setup” tab on the OSD Menu.
(2) Select “Date/Time” using the [ENTER] or
[▼] button and press [ENTER].
8.2.1 Time Zone
(1) Select “Time Zone” using the [◀/▶] or [▲/▼] arrow buttons and press the [ENTER] button.
(2) Select a value using the [
◀/▶ ] buttons and press the [ESC] button when finished.
8.2.2 Daylight Saving
(1) “Daylight Saving Time” is only activated when the time zone is selected.
(2) Select “
Daylight Saving ” using the [◀/▶] or [▲/▼] arrow buttons and press the [ENTER] button.
(3) Select “Yes/No” using the [◀/▶] buttons and press the [ESC] button.
8.2.3 Sync with NTP
In order to synchronize time with the NTP (Network Time Protocol) server, select “On”.
(1) Select “Sync with NTP” using the
[◀/▶] or the [▲/▼] buttons and press the [ENTER] button.
(2) Select “On/Off” using the
[◀/▶] buttons and press the [ESC] button.