4CHAPTER FOUR:SPECIAL FEATURES 4.16
SPECIAL FEATURES
5
Press the VOL + button
to highlight “On/Off.”
Press the CH ▲ or CH ▼
buttons to turn the on-
timer “On.” (Repeatedly
pressing the CH ▲ or
CH ▼ buttons will alter-
nate between on and
off.)
▼
To deactivate the “On time,”
select “Off” during this step.
7
To set the Off time, press
the CH ▼ button to high-
light “Off time.”
Press the VOL + button
and set the hours and
minutes. (Follow the
same procedure as in
steps 1~6 above.)
8
When finished setting the timer, press the Menu button three
times to exit.
1
Press the Sleep button on the remote control.
2
Press Sleep repeatedly until the appropriate time interval
appears (any of the preset values from “Off” to “360”).
▼
After about 5 seconds, the sleep
display will disappear from the
screen, and the time interval will be
set.
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(from 10 to 360 minutes).
6
When finished, press the VOL + button.
01066D(E)-CHAPTER 4 4/12/05 9:29 AM Page 16
To Next Page
Loading...
