Samwon Tech TEMI850 - Page 53

SAMWONTECH
4th Edition of TEMI880 IM : Jan. 29. 2007 Page 51 / 119
2.12.1.2 Humidity Input Setting
Figure 2-42. Humi. Input Setting – PT Figure 2-43. Humi. Input Setting - DCV
No. Contents Description Additional Description
○
1
SENSOR TYPE Select sensor type.
○
2
HUMI RANGE Set humidity range.
▶ PT : -10.0 ~ 110.0 ℃
▶ DCV : 1.000 ~ 5.000 V
○
3
HUMI BIAS Set humidity bias.
○
4
DISPLAY FILTER
Set for decreasing when PV is
unstable due to sensitive
sensor response under
normal control.
○
5
FILTER TIME Set filter time.
○
6
HUMI SCALE
A case where sensor type is
“DCV”, set humidity scale.
☞ Sensor type can not change on running.
○
1
○
2
○
3
○
4
○
6
○
5