19/97
c) Inverter modules only
Configuration:
- inverter powered directly from a DC power supply source;
- inverter used as a regenerative power supply unit (for more details, please refer to the technical documentation
relating to the Regenerative Penta Drive)
Models where no parallel-connected inverter modules are installed (S64)
Inverter Modules
with Auxiliary Power
Supply Unit
Inverter Modules
with Auxiliary
Power Supply
Unit
230x1400
x480(*)
730x1400
(*): When housing the control unit or the auxiliary power supply unit, the module depth is 560 mm.
(**): One inverter module must be provided with an integrated auxiliary power supply unit.
Models including parallel-connected inverter modules (S74 and S84)
Inverter Modules
with Auxiliary Power
Supply Unit
Inverter Modules
with Auxiliary
Power Supply
Unit
230x1400
x480(*)
1480x1400
x560
118 110
676
(*): When housing the control unit or the splitter unit or the auxiliary power supply unit, the module depth is 560 mm.
(**): Three inverter modules are to be provided with an integrated splitter unit.