Sanyo PLC-XE32 User Manual

Video Input
34
Choose Video by pressing the VIDEO button on the
remote control.
Input Source Selection (Video)
Direct Operation
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Press the Point ◄► buttons to move the red
framed pointer to the Input Menu icon.
Press the Point ▲▼ buttons to move the red arrow
pointer to Video and then press the SELECT
button.
1
2
Menu Operation
Move the pointer to
Video and press the
SELECT button.
Input Menu
Input Menu icon
Video
VIDEO button
 Note:
When the Input Search function is set On1 or On2,
the input signal will be searched automatically
(p.45)

Sanyo PLC-XE32 Specifications

General

Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±20 °
Lamp type	UHP
Lamp power	200 W
Light source type	Lamp
Focus	Manual
Focal length range	22.5 - 27 mm
I/O ports	D-Sub15 S-Video Composite Monitor out D-sub15 Audio out Service Port Mini DIN 8-pin
Dimensions (WxDxH)	330 x 237 x 80 mm
F-number (relative aperture)	1.65
Power consumption (typical)	205 W

Weight and Dimensions

Weight	2900 g