Sanyo PLC-XE32 Service Manual

Multimedia Projector
SERVICE MANUAL
PRODUCT CODE
1 122 426 00 (LE7AC)
1 122 426 02 (LE7CC)
Original Version
REFERENCE NO. SM5110919-00
FILE NO.
Model No. PLC-XE32
Europe, U.K,
Chassis No. LE7-XE3200
Match the Chassis No. on the unit's back cover with the Chassis
No. in the Service Manual.
If the Original Version Service Manual Chassis No. does not
match the unit’s, additional Service Literature is required. You
must refer to “Notices” to the Original Service Manual prior to
servicing the unit.

Sanyo PLC-XE32 Specifications

General

Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±20 °
Lamp type	UHP
Lamp power	200 W
Light source type	Lamp
Focus	Manual
Focal length range	22.5 - 27 mm
I/O ports	D-Sub15 S-Video Composite Monitor out D-sub15 Audio out Service Port Mini DIN 8-pin
Dimensions (WxDxH)	330 x 237 x 80 mm
F-number (relative aperture)	1.65
Power consumption (typical)	205 W

Weight and Dimensions

Weight	2900 g