Sanyo PLC-XF60A - Mechanical Disassemblies

- 11 -
A
A
A
A
B
B
A
Mechanical Disassemblies
z Cabinet Front-A , Cover and Lamp Cover removal
A : (M4 x 8) x 5 on cabinet front-A and cabinet front
B : Lamp cover-L and R
Screws Expression
(Type Diameter x Length) mm x pcs
T type M Type
Mechanical disassemblies should be made following to the SEQ No. indicated
on the right of each item. Following steps show the basic procedures, there-
fore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the orig-
inal otherwise it may cause loss of performance and product safety.
SEQ No. z
Fig.1
Cabinet Front-A
Cabinet Front-AV
Cover
Lamp Cover-R
Lamp Cover-L