- 30 -
LCD Panel Replacement
Procedure
1 Remove the Cabinet Top following to chapter “Mechanical Disassemblies”.
2 Remove the FPC cables on the LCD DRIVE board.
3 Remove 4 screws A then pull up the LCD/Prism assy uppward.
4 Remove 3 screws B to take off the LCD panel from the panel holder.
After replacing the LCD panel, the some adjustments are required to maintain the best performance. See further
information chapter “Adjustments after parts replacement”.
Fig.1
B-LCD Panel
G-LCD Panel
R-LCD Panel
(M2 x 6) x 3
(M2 x 6) x 3
(M2 x 6) x 3
A
B
B
B
(M2.5 x 6) x 4
LCD/Prism Ass'y
To Next Page
Loading...
