Sanyo PLC-XF60A User Manual

- 6 -
Safety Protections
3. Lamp cover switches
There are mechanical switches SW902 and SW905 inside of the projector to detect that the covers are mounted cor-
rectly. When one of them detects an error (open), the projector cannot turn on.
- Lamp1 cover switch (SW902)
- Lamp2 cover switch (SW905)
SW902
SW905

Sanyo PLC-XF60A Specifications

General

Vertical scan range	48 - 120 Hz
Horizontal scan range	15 - 120 kHz
Projection technology	LCD
Contrast ratio (typical)	1300:1
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	40 °
Keystone correction, horizontal	30 °
Aspect ratio	4:3
Compatibility	UXGA/SXGA/XGA/SVGA/VGA/Mac
Dimensions (WxDxH)	518 x 252 x 606 mm
Power requirements	AC 100-240 V, 50/60 Hz
Lamp type	UHP
Lamp power	300 W
Light source type	Lamp
Noise level	39 dB
Dot clock scanning frequency	230 MHz
Microphone in	Yes
S-Video inputs quantity	1
Power consumption (typical)	900 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	24000 g