Sanyo PLC-XF60A - Page 29

- 29 -
⁄0 Optical Parts in the Optical Unit
When the optical parts mounting or assembling in the optical unit, the parts must be mounted in the specified location
and direction as shown in figure below.
SEQ No. zxv.⁄0
Optical Parts Disassemblies
Fig.10
405
405
404
404
403
No.
No.
No.
No.
- The direction of the printed number on the lens is as
shown in the figure.
- The arrows in the figure indicate the location and di-
rection of the printed number on the parts or the cut-
ting corner of the parts.
Dicroic Mirror(C)
Dicroic Mirror(Y)
Mirror (B-Cold)
Relay Lens (In)
Relay Lens (In)
Condenser Lens (In)
Condenser Lens
Condenser Lens(R)
Optical Filter
(Spacer)
Mirror (B-Cold)
Optical Filter
(B)