Sanyo PLC-XF60A - Integrator Adjustment

- 36 -
v Integrator adjustment
1 Move the Integrator-out and Integrator-in to remove the shadow
area on the top/bottom or left/roght of the screen.
1) To adjust the image vertically as shown in Fig.4-1, loosen 2
screws A, and move the slot B by using a slot screwdriver.
2) To adjust the image horizontally as shown in Fig.4-2, loosen 2
screws C, and move the slot D by using a slot screwdriver.
2 Tighten screws A and C to fix the Integrator-out and Integrator-in
unit.
(Target screen image)
Fig.4-1 Fig.4-2
Optical Adjustment
A
B
A
C
D
C