Sartorius Biowelder Total Containment - Device Start-up Procedures; Delivery Kit and Component Familiarization

Operating Manual Biowelder
®
Total Containment 13
Start-up
5 Start-up
5.1 Delivery kit
This Chapter is a step-by-step guide for the start-up of the Biowelder
®
TC.
 Biowelder
®
TC device
 Blade remover tool
 Tube holder set
 Validation set, optional
 Power cord
 QC samples made with your unit
 SD memory card inserted into slot, optional
 Quick start guide
 Operating manual
 Biowelder
®
TC certificate
 Acceptance report
 EC-declaration of conformity
5.2 Familiarizing yourself with the device
Item Description
1 Blade remover tool
2 Tube holder set (by pair)
3 Validation sensor with holder
4 SD memory card slot
5 Ethernet cable terminal
6 Device socket with main switch and fuse carrier
7 Touch screen
8 Closing handle for cover
9 Carrying handle, front
10 Carrying handle, rear
11 Nameplate with serial number
12 Emergency off button
1
2
7
9
3
6
11
10
4
5
8
12