Operating Manual Biowelder
®
Total Containment 41
Appendix
9.6 User groups and user interfaces
The following table shows the authorizations of user groups and the user
interfaces.
The two user groups are indicated in the User Group column. Operator
group has lower-level authorizations and Supervisor group has higher-
level authorizations.
The Operator Control column indicates which user interface supports
which function.
Whether a function is usable depends on the machine status. Welding, for
example, is impossible if no initialisation is done or if the device is blocked.
These limitations are not visible here.
Example: A user from the Supervisor group can validate, but a user from
the Operator group cannot.
User group Operator control Function Comments
Group or menu item Detail
Operator Touch screen and
Web browser
Initialise axis
Weld
Log in
Log out
Parameter User management Only the user’s own
password, no assignment
by auto login
Touch screen Info
SD card
Supervisor Touch screen and
Web browser
Validate
Parameter Type of tube
Language
User management No restriction for the
processing of users from
the user’s own group or
those
of a lower level
Web browser DHCP
MAC address
Static IP address
Static subnet mask
Static default gateway
address
Static server address
Info
Touch screen Time
Date
Network reset
To Next Page
Loading...